World-class componentry

Wade Hub Kit WHK

The Wade Hub Kit is a fully customisable Response Vehicle Control System designed to deliver adaptable lighting and siren management for emergency, specialist, and fleet vehicle applications. Engineered to provide installation flexibility without sacrificing performance or reliability, the Wade Hub Kit combines tactile cabin controls, configurable output logic, and professional-grade hardware into a compact and scalable solution.
Unlike fixed-layout control systems, the Wade Hub Kit is designed to adapt to the vehicle and operational requirement — not the other way around. Through configurable software and a customisable control interface, the system can be tailored to suit a wide range of emergency and specialist fleet deployments.

Hub Control Head HCH

In emergency response environments, seconds matter.
Unlike touchscreen systems, the Hub Control Head HCH features physical buttons and a rotary knob. This gives tactile feedback for intuitive, eyes-free operation.
Physical controls allow operators to activate functions confidently without navigating digital menus – this means faster activation, improved safety, and reduced cognitive load.

Siren and Light Controller SLC

The Siren and Light Controller SLC delivers high-output siren and multi-channel lighting control in a single integrated module.
Key performance characteristics include:
• 100W 11Ω siren speaker support
• Nominal ±34V siren output (13.6V battery)
• 200Hz – 5kHz siren audio response
• 3A per light channel (12A total capacity)
• Internal overcurrent detection circuitry
This ensures consistent, powerful siren performance and dependable lighting control under demanding conditions.

Easy custom software configuration

Wade Dog Pod Unit DPU

The Wade Dog Pod Unit is a fully integrated canine management system engineered specifically for operational vehicles carrying working dogs. Designed to provide active temperature monitoring, intelligent ventilation control, and secure access management, the Dog Pod Unit delivers critical safety safeguards while maintaining handler control and operational flexibility.
Developed for specialist fleet applications, the system integrates seamlessly into modern vehicle builds and can operate independently or as part of the Wade EVCS ecosystem. The result is a purpose-built solution that enhances canine welfare, reduces risk, and provides handlers with confidence in dynamic operational environments.

Dog Pod Controller PDC

Dog Pod Interface DPI

Remote Key Fobs

Wade EVCS

Wade’s Emergency Vehicle Control System EVCS is a fully integrated command and control platform engineered specifically for modern emergency and specialist vehicle applications.
Designed as a cohesive ecosystem rather than a collection of standalone components, The Wade EVCS integrates lighting control, siren functionality, vehicle inputs, and operational logic into a centralised, configurable architecture.
The result is a system that enhances response efficiency, improves operator confidence, and reduces install complexity.
Built for frontline environments where reliability is non-negotiable, The Wade EVCS combines tactile user controls, advanced configuration capability, and heavy-duty hardware into a scalable and future-ready solution.

Remote Control Head RCH

In emergency response environments, seconds matter.
Unlike touchscreen systems, the Remote Control Head RCH features physical buttons and a rotary knob. This gives tactile feedback for intuitive, eyes-free operation.
Physical controls allow operators to activate lighting modes, sirens, or auxiliary functions confidently without navigating digital menus – this means faster activation, improved safety, and reduced cognitive load.

Siren and Light Controller SLC

The Siren and Light Controller SLC delivers high-output siren and multi-channel lighting control in a single integrated module.
Key performance characteristics include:
• 100W 11Ω siren speaker support
• Nominal ±34V siren output (13.6V battery)
• 200Hz – 5kHz siren audio response
• 3A per light channel (12A total capacity)
• Internal overcurrent detection circuitry
This ensures consistent, powerful siren performance and dependable lighting control under demanding conditions.

Master Control Panel MPC

The Master Control Panel MCP manages the vehicle’s on-board systems including:
• Lighting logic
• Siren activation
• Vehicle inputs
• CAN and LIN communication
• Radio integration
• Configurable outputs
The MCP supports multiple fused outputs and configurable inputs, allowing installers to tailor the system precisely to the vehicle’s operational requirements.
With integrated CAN and LIN bus capability, the MCP can interface with steering wheel controls, vehicle signals, radar systems, radios, and additional emergency equipment.

Physical Buttons and Rotary Control

In emergency response environments, seconds matter.
Unlike touchscreen systems, the Remote Control Head RCH features physical buttons and a rotary knob. This gives tactile feedback for intuitive, eyes-free operation.
Physical controls allow operators to activate lighting modes, sirens, or auxiliary functions confidently without navigating digital menus – this means faster activation, improved safety, and reduced cognitive load.

One-Touch Blackout Mode

The integrated blackout function instantly disables all external lighting. This capability is critical in operational scenarios where visibility must be minimised.
To maintain safety, blackout mode automatically disengages once the vehicle begins moving. This intelligent safeguard ensures operators are not burdened with remembering to reactivate lighting while working under pressure.

Ignition Bypass with Configurable Timeout

The RCH incorporates an ignition bypass function allowing vehicle equipment and peripherals to operate with the ignition off.
This is particularly valuable during stationary deployments, scene management, or extended roadside operations.
The ignition bypass automatically disengages after a configurable timeout period to protect the vehicle’s battery, allowing fleet managers to tailor the system to their requirements.

Siren Light Controller SLC

The Siren and Light Controller SLC delivers high-output siren and multi-channel lighting control in a single integrated module.
Key performance characteristics include:
• 100W 11Ω siren speaker support
• Nominal ±34V siren output (13.6V battery)
• 200Hz – 5kHz siren audio response
• 3A per light channel (12A total capacity)
• Internal overcurrent detection circuitry
This ensures consistent, powerful siren performance and dependable lighting control under demanding conditions.

Fully software configurable outputs

Fully software configurable inputs

Wade Custom Gearplate

Master Control Panel MCP

The Master Control Panel MCP manages the vehicle’s on-board systems including:
• Lighting logic
• Siren activation
• Vehicle inputs
• CAN and LIN communication
• Radio integration
• Configurable outputs
The MCP supports multiple fused outputs and configurable inputs, allowing installers to tailor the system precisely to the vehicle’s operational requirements.
With integrated CAN and LIN bus capability, the MCP can interface with steering wheel controls, vehicle signals, radar systems, radios, and additional emergency equipment.

Wade Custom Gearplate

Tru-Speed Auxillary Speedometer TSP

The Wade Tru-Speed Auxiliary Speedometer is a professional grade secondary speed display solution for specialist fleet, emergency response, compliance, and government vehicle applications.
In operational environments where accuracy, reliability, and system integration are critical, Tru-Speed delivers dependable performance in a refined, compact package.
Combining advanced CAN data support, automatic calibration capability, configurable power management, and a durable impact-resistant housing, Tru-Speed is engineered for long-term frontline service. Its intuitive two-button interface eliminates unnecessary complexity while retaining full operational functionality.

Tru-Speed Auxillary Speedometer TSP

• Easy to use
• Highly accurate
• Automatic display dimming
• Speed lock mode
• Auto calibration